Moving out of a rental can be a stressful time and often raises concerns over tenants receiving their full bond back. In Logan, property managers and agents strictly enforce guidelines around assessing property cleanliness before releasing the tenant’s final bond, and even a minor area that has been missed can result in a deduction for cleaning. Therefore, you must have a proper bond-cleaning checklist as you move out.
This guide will show you what agents will usually look for when inspecting a bond and how tenants can best prepare their property to hand the keys back.
In this blog, we will deeply talk about the Bond Cleaning Checklist for Houses in Logan and what agents check.
Why is bond cleaning important?
Bond cleaning (or end of lease cleaning) is the process whereby a tenant cleans the rental property before vacating. The purpose of this process is to return the property to the owner in the same condition it was in at the beginning of their tenancy.
Most Logan landlords have an expectation of professional-level cleanliness and if the house has not been cleaned correctly then agents can hire a cleaner and deduct that cost from the tenant’s bond money.
An extensive checklist can assist tenants in preparing their property properly to avoid unnecessary issues and missing out on cleaning.
What a property manager checks when doing a bond inspection
-
Cleaning of the kitchen
The kitchen is typically one of the first areas to be inspected, as food, grease, and stains build up quickly.
Property managers generally check:
- The inside and outside of the oven
- The stove and range hood
- The tiles and splashback in the kitchen
- The sink and taps
- The cupboards and drawers
- The bench tops
- The dishwasher
- The exhaust fans
Dirty range hood filters and ovens that are greasy are the two big reasons a tenant loses part or all of their bond because they did not clean the surface area enough or at all and left the oven or range hood with stains and grease.
-
Cleaning of the bathroom and toilet
All bathrooms should be cleaned enough so they look clean and fresh and are also hygienic and free of mould.
The property manager would generally inspect:
- The shower screens
- The tiles and grout
- The toilet and toilet seat
- The mirror
- The bathtub
- The vanity sink
- The exhaust fan
- The taps and other fittings
The main problem during inspections of bathrooms is soap scum, water stains and mould. Make sure to clean the corners of the bathtub and shower screens where mould is likely to build up as well as the grout of the tiles.
-
Cleaning of bedrooms and living areas
The bedrooms and living areas should be free of dust and well-maintained.
The property manager generally inspects:
- The walls and skirting
- The window and tracks
- The doors and handles
- The light switch
- The ceiling fans
- The air conditioning vents
- The cupboards in the wardrobes and on the shelves
- The flooring and carpets
Dusty ceiling fans or smudges on the walls will negatively impact your final bond inspection report.
-
Cleanliness of the carpet
The condition of the carpet is extremely important for Logan rental properties.
Property Managers will check the carpet for any signs of:
- Dust or dirt
- They look for the pet hair on the carpet
- Food stains on the carpet are checked
- They check for odor from the carpet
- Property managers need to have the steam cleaning proof
-
Windows & Glass Surfaces
Having clean glass features helps improve how nice a property looks.
The following areas will be checked by agents:
- Glass panels
- Window tracks
- Fly screens
- Sliding doors
- Mirrors
Tenants frequently do not clean the dust from the tracks and the fingerprint marks off the glass before they move out.
-
Laundry Area
A pristine laundry area is equally important.
The following areas will be checked by agents:
- Laundry basin
- Taps (faucets)
- Cupboards
- Dryer filters
- Floors and walls
Even small areas, such as behind the washing machine, must be cleaned; for example, a small pile of lint could be overlooked.
-
Outdoor Areas
Evaluation of the outdoor areas of a home in Logan is as imperative as the indoor areas.
The following areas will typically be inspected by the agents:
- Garage floor
- Patio/balcony
- Garden area
- Lawn condition
- Rubbish removed
- Outdoor windows
- Fences and paths
If a tenant leaves a property with overgrown lawns or debris, they could incur extra cleaning or horticulture charges.
Common Bond Cleaning Mistakes Made by Tenants
Most tenants lose at least a portion of their bond due to overlooking small but significant details.
The following mistakes are frequently made:
Neglecting to Clean Hidden Areas
Hidden areas such as those located behind appliances, under sinks and/or inside cupboards are often not considered worthy of additional time devoted to being cleaned.
Failing to Remove Stains
Holes, carpet stains and grease stains must be removed before inspection.
Overlooking Air Conditioners
Dusty filters and vents can provide a bad first impression at the time of the inspection.
Leaving Rubbish Behind
Any small number of items transported to the garage or backyard once removed from behind, may result in a deduction from the bond refund.
What are the top tips that you should know to pass the final inspection test?
- You can compare the condition of the property from day 1 of your arrival to the last day. Using the entry condition report can help you pass the inspection.
- Start early to clean your house. This helps you to clean without any stress or hurry.
- Make sure to clean every corner and pay attention to details.
- Repair the small damages that can cost you bond deductions.
- Hiring professional bond cleaners is the easiest and most relevant way to pass the final inspection test without any risk.
Should you hire the professional bond cleaners in Logan?
It is the best idea to hire a professional bond cleaner in Logan. They provide you with the best services and also guarantee you the full bond refund. Professional cleaners provide a wide variety of cleaning services at reasonable prices.
All Bond Cleaning Brisbane is a top company that provides bond cleaning services in Logan. You can contact them to know more about their services.
Blockquote
A clean home means a better chance of getting your full bond back.
Conclusion
Bond cleaning is an important part of the end of a rental lease. Property managers do a thorough and deep inspection of the property before passing it. You can either hire a bond cleaner or do it on your own. Make sure to follow the complete checklist for DIY cleaning. Professionals follow the checklist that is inspected by the bond cleaners.
All Bond Cleaning Brisbane provides the best bond cleaning services at reasonable prices. Feel free to know in detail about the services.
Contact details
Company name – All Bond Clean Brisbane
Address – 204 38 Bryden St, Windsor, QLD 4030
E-mail – info@allbondcleanbrisbane.com.au
Phone – 0479 183 820
Frequently Asked Questions
Which company provides the best bond cleaning services in Logan?
All Bond Clean Brisbane provides the best bond cleaning services in Logan at competitive prices.
What is covered by a bond clean checklist?
Kitchen, bathroom, carpet, window, wall & outdoor area cleaning.
Are agents looking for stains on carpets during an inspection?
Yes, they will thoroughly examine the carpet for stains, odor, and damage.
Is it compulsory to have your carpets professionally cleaned before leaving a rental property in Logan?
Most agreements stipulate that you must have the carpets professionally steam cleaned while vacating.
Can dirty walls not being cleaned affect my bond refund?
Yes, marks, stains and scuff marks may cause you to lose your bond.
How long does bond cleaning usually require?
Time is dependent upon the size of the property and the level of cleaning that has been previously done.
Why do tenants request a professional bond clean?
To save themselves time and to give themselves the best chance of receiving their full bond back.
